User Manual

Aolynk DR811/DR814 ADSL2+Broadband Router

4 Web-based Management

18

To delete a present WAN service, click the

label that corresponds to this item to

open the web page

Delete WAN connection

.

Figure 4-5

Delete WAN settings

Click the

button to delete the service.

&

Note:

Only services created by the user can be edited. The first two items in the WAN service

list are default services.

To add a new WAN service, click the

label to open the web page

WAN Connection: create service

. To add a new service, refer to 7

Service

Configuration.

To configure the routes, click the

label to open the route configuration page.

To edit routes, refer to

4.6

Route.

4.3 DNS Relay

A DNS relay server forwards the requests received from the PCs on the LAN to the

actual DNS servers. When the unit is configured as a DNS relay server, users will not

need to change the DNS server IP address on their PC whenever their ISP changes

DNS servers, or when the user connects to a different ISP.

Click

WAN Setup

in the Main menu and choose the

DNS Relay

tab in the Main Frame

to open the DNS configuration page.

User Manual

Aolynk DR811/DR814 ADSL2+Broadband Router

4 Web-based Management

19

Figure 4-6

DNS relay

This page allows you to:

●

Edit a DNS server address present in the DNS relay list.

●

Add a new DNS server to the DNS relay list.

●

Delete a present DSN server.

To edit a present DNS server item, modify the server

’

s IP address and click the

button.

To delete a present DNS server, check the corresponding check box

and click the

button.

To add a new DNS server, enter the server

’

s IP address, and then click the

button. For more details about IP address, refer to 6.1 IP Addresses.

&

Note:

In DNS Server list, the first address should correspond to the Primary DNS server; the

second address should correspond to the Secondary DNS server, and so on. You

cannot have more than three addresses at a time.

4.4 LAN Setting

Click

LAN Setup

in the Main menu and choose the

LAN

tab in the Main Frame to open

the LAN configuration page.

User Manual

Aolynk DR811/DR814 ADSL2+Broadband Router

4 Web-based Management

20

Figure 4-7

LAN setting

This page allows you to:

●

View and modify the LAN IP address and subnet mask.

●

Advanced configuration about LAN setting.

●

Edit a route.

●

Create a virtual interface.

●

Edit the current virtual interface.

●

Delete the current virtual interface.

To modify the LAN IP address and subnet mask, enter the IP address and/or subnet

mask, and then click the

button. For more details about IP address, refer to

6.1

IP Addresses.

To configure the advanced attributes about LAN settings, click the

label to

open the web page

Edit iplan.

If needed, change the values of options, and then click

the

button.

User Manual

Aolynk DR811/DR814 ADSL2+Broadband Router

4 Web-based Management

21

Figure 4-8

Edit iplan interface

To configure the routes, click the

label to open the route configuration page.

To edit routes, refer to 4.6

Route.

To create a new virtual interface, click

Create a new virtual interface

to enter the

Create virtual interface

page. Input an IP address for the virtual interface and/or a

subnet (Note that the IP address of the virtual interface must not belong to the same

subnet as that of the LAN interface), and then press

Apply

to enable it. Refer to 6.1

IP

Addresses for more information about IP address. The virtual interface created here

can be used for DMZ configuration. Refer to 4.8 DMZ Configuration for more

information.

To edit the current virtual interface, click <

Edit

…

>

.

Then in the new page, change the

settings if necessary, and press <change> to confirm your changes.

To delete the current virtual interface, click <

Delete

…

>. Then in the new page, click

<

Delete this connection

…

> to confirm your deletion.

&

Note:

Only after the user has created a virtual interface can you create a new security

interface in

Security Interface Configuration

page, refer to 4.7

Security Interface for

more information.

4.5 DHCP

As a DHCP server, the unit maintains a pool of IP addresses and distributes them to

LAN hosts whenever those hosts are switched on.

User Manual

Aolynk DR811/DR814 ADSL2+Broadband Router

4 Web-based Management

22

Click

LAN Setup

in the Main menu and choose the

DHCP

tab in the Main Frame to

open the DHCP configuration page.

Figure 4-9

DHCP setting

This page allows you to:

●

Enable/disable the DHCP server.

●

Assign the DHCP server address pool.

If the DHCP server is currently disabled, you may click the

button to enable it.

If the DHCP server is currently enabled, you may click the

button to disable

it.

The DHCP server (if enabled) will use the address pool defined in this page to provide

IP addresses to requesting DHCP clients. You may check the

Use the default range

box

to assign a suitable default IP address pool on this subnet (recommended). If

needed, you can change the DHCP address pool manually, but you must uncheck the

Use the default range

box in the meantime.

To change the DHCP address pool manually, enter the start IP address and/or end IP

address, and then click the

button. For more details about IP address, refer to 6.1

IP Addresses.

Enter a DNS suffix in the

Local domain name

box as needed. This option is usually

used for small- to moderate-sized enterprises. Common home users do not need to set

it.

4.6 Route

This option allows you to create static IP routes to destination addresses via an IP

interface name or a gateway address.

To access the route configuration page, follow anyone of these steps: