BreezeMAX PRO 6000 Product Manual

Chapter 1 - Product Description

BreezeMAX PRO 6000 CPE Specifications

6

1.2.6

Reliability Specifications

Safety

UL/CUL 60950-1 (USA+Canada)

System

EN60950 (Europe)

IEC-60950-1

AS-3260 (Australia)

Canadian standards

IC RSS-192 – 3450-3650MHz

ODU

SRSP-303.4 Issue 3 - 3475-3650 MHz

IC RSS-197 - 3650-3700 MHz

SRSP-303.65 Issue 1

ICES-003 - Digital Apparatus

Table 1-6: PRO 6000 CPE Reliability Specifications

Item

Details

MTBF

The MTBF for CPE is not less than 300,000 hours.

Table 1-5: PRO 6000 CPE Regulatory Specifications

Standard

Specification

Applicable to

Chapter 2 - Installation

In This Chapter:



“Installation Requirements” on page 8



“Pole Mounting the ODU” on page 11



“Connecting the ODU Cables” on page 13



“Checking for Proper Operation” on page 19

BreezeMAX PRO 6000

Product Manual

Chapter 2 - Installation

Installation Requirements

8

2.1

Installation Requirements

The BreezeMAX PRO 6000

CPE is installed by the operator's installation technicians.

2.1.1

Package Content

Make sure that each package contains the items listed below:



BreezeMAX PRO 6000 Outdoor Unit (ODU)



Indoor power supply unit (IDU) Power Over Ethernet 802.3af compliant



Crossed Ethernet cable with two RJ-45 connectors for connecting the IDU power injector to a

PC/HUB/switch.



Pole mounting kit



Optional - Tilt Accessory kit (ordered separately)



Quick Installation Guide

2.1.2

Additional Installation Requirements



Indoor-to-outdoor Category 5E PoE Ethernet cable with two shielded RJ-45 connectors* and an RJ-45

connectors crimping tool. For details on approved cables and maximum length, refer to

Section 2.1.4

.

CAUTION

ONLY experienced installation professionals who are familiar with local building and safety codes and,

wherever applicable, are licensed by the appropriate government regulatory authorities should install

outdoor units and antennas.

Failure to do so may void the product warranty and may expose the end user or Service Provider to

legal and financial liabilities. Alvarion and its resellers or distributors are not liable for injury, damage or

regulation violations associated with the installation of Outdoor Units or antennas.

Français

SEULS les installateurs professionnels expérimentés qui sont familiers avec les codes locaux des

bâtiments et de la sécurité et, lorsque cela s'applique, qui sont autorisés par les autorités

gouvernementales de régulation, doivent installer les unités extérieures et les antennes. Le non-respect

de cette clause peut invalider la garantie du produit et exposer l'utilisateur final ou le prestataire de

services à des responsabilités légales et financières. Le fabricant et ses revendeurs ou distributeurs ne

sont pas responsables pour toute blessure, dommage ou violation de la réglementation associée à

l'installation d'unités extérieures ou d'antennes.

Italiano

ATTENZIONE: SOLO professionisti esperti che hanno familiarità con le norme di costruzione locali e coi

codici di sicurezza e, ove applicabile, sono autorizzati dalle autorità governative competenti possono

installare unità esterne ed antenne. Assicurarsi che le unità esterne, antenne e strutture di supporto

siano installate correttamente per eliminare ogni pericolo fisico a persone o cose. In caso contrario, ciò

può invalidare la garanzia del prodotto e può esporre l'utente finale o il fornitore di servizi a

responsabilità legali ed economiche. Anche quando la messa a terra non è obbligatoria in base alla

normativa regolatoria applicabile e ai codici nazionali, è obbligatorio garantire che l'unità esterna e il

palo dell'antenna siano messi a terra e idonei dispositivi di protezione contro i fulmini siano utilizzati in

modo da fornire protezione contro le sovratensioni e le scariche statiche. In ogni caso, il Fornitore e i

suoi rivenditori non sono responsabili per eventuali danni fisici, danni ad oggetti o violazioni del

regolamento associati con o causati dall' installazione, la messa a terra o di protezione contro i fulmini.

BreezeMAX PRO 6000

Product Manual

Chapter 2 - Installation

Installation Requirements

9



Mains plug adapter or termination plug (if the power plug on the supplied AC power cord does not

fit local power outlets).



Grounding cable with an appropriate termination



Sealing gland fastening tool*



Installation tools and materials



Sealing materials: mastic tape (Scotchfil™ Electrical Insulation Putty), Cold Shrink sealing kit.

2.1.3

Guidelines for Positioning the ODU

This section provides guidelines for selecting the optimal installation locations for the ODU.

Select the optimal locations for the equipment using the following guidelines:



The ODU should be mounted on a 1"- 4" pole. Its location should enable easy access to the unit and

its connectors for installation and testing.



Place the ODU as high as possible to achieve the best possible link quality.



Place the ODU away from power and telephone lines.



Avoid placing the ODU too close to any metallic reflective surfaces.



Be sure to ground the ODU with an appropriate grounding wire (not included) by attaching it to the

grounding screw on the unit and to a good ground connection.



An optional Tilt accessory for the ODU providing a tilt range of ±15° is available from Alvarion. The tilt

option might be necessary to either improve the link conditions or, if the ODU is too close to the BTS,

to reduce the receive signals strength. As a rule of thumb, if the ODU is located at a distance of less

than 300 meters from the BTS, it is recommended to up-tilt the antenna by approximately 10° to 15°

(especially in line-of-sight conditions) to avoid saturation of the receivers by too strong signals.

2.1.4

IDU-ODU Cables

Use only Category 5E PoE Ethernet cables from either Alvarion or any of the approved manufacturers,

listed in

Table 2-1

below. Consult with Alvarion's specialists on the suitability of other cables.

INFORMATION

Items marked with an asterisk (*) are available from Alvarion.

INFORMATION

The length of the Indoor-to-Outdoor cable should not exceed 90 meters. The length of the

Indoor-to-Outdoor cable, together with the length of the Ethernet cable connecting the CPE-IDU-1D to

the data equipment, should not exceed 100 meters.

BreezeMAX PRO 6000

Product Manual

Chapter 2 - Installation

Installation Requirements

10

In case of missing information in the manufacturer's WEB site (product specifications, ordering issues,

etc.), it is highly recommended to contact the manufacturer's sales representative directly.

Table 2-1: Approved Category 5E Ethernet Cables

Manufacturer

Part Number

UNIXTAR

www.unixtar.com.tw

C5ES4P24

WESTERN

www.westernwire.org

KF804E1D