1. Home
    2. /
  2. Manuals
    3. /
  3. A-Link
    4. /
  4. WNAP4G
    5. /
  5. 6
Page 26 / 111 Scroll up to view Page 21 - 25
A-LINK WNAP4G
User Manual
26
a.
WAN Type:
Choose iBurst for WAN connection.
b.
Account:
Enter the User Name for iBurst connection.
c.
Password:
Enter new Password for iBurst connection.
d.
Primary DNS:
You can assign a Primary DNS server if required. (Optional)
e.
Secondary DNS:
You can assign a Secondary DNS server if required.
(Optional)
f.
Connection Control:
There are 3 options to start connection:
Auto Reconnect (Always-on): The device will always try to link to Internet.
Connect-on-demand: The device won
’
t try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
Page 27 / 111
A-LINK WNAP4G
User Manual
27
Manually: The device won
’
t try to connect to Internet until users press
“
connect
”
button at Status page. Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
g.
Maximum Idle Time:
The amount of time of inactivity before disconnecting
Internet connection. Set it to zero, or choosing
“Auto
-reconnect
”
mode to
disable this feature.
h.
Service Name:
Input the service name if your ISP requires it. (Optional)
i.
Assigned IP Address:
Input a IP address if your ISP requires it. (Optional)
j.
Maximum Transmission Unit (MTU):
You can change MTU value if
required. The default MTU value is set to 0 (auto).
k.
NAT disable:
You can disable NAT feature if required.
l.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
C. Static IP Address
Page 28 / 111
A-LINK WNAP4G
User Manual
28
a.
WAN Type:
Choose Static IP Address.
b.
WAN IP Address:
Input the IP address you got from ISP.
c.
Subnet Mask:
Input the subnet mask of IP address you got from ISP.
d.
WAN Gateway:
Input the IP address of WAN gateway you got from ISP.
e.
Primary DNS:
Input the IP address of primary DNS you got from ISP.
f.
Secondary DNS:
Input the IP address of secondary DNS you got from ISP.
g.
NAT disable:
You can disable NAT feature if required.
h.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
D. Dynamic IP Address
Page 29 / 111
A-LINK WNAP4G
User Manual
29
a.
WAN Type:
Choose Dynamic IP Address.
b.
Host Name
: Optional, required by some ISPs, for example, @Home.
c.
ISP registered MAC Address
: Some ISP (Cable company) will record your
MAC address on PC. You can press “Clone” button to copy the MAC address
on your PC here, or you can input it manually.
d.
Maximum Idle Time:
The amount of time of inactivity before disconnecting
Internet connection. Set it to zero, or choosing
“Auto
-reconnect
” mode
to
disable this feature.
e.
Connection Control:
There are 3 options to start connection:
Auto Reconnect (Always-on): The device will always try to link to Internet.
Connect-on-demand: The device
won’t try to connect to Internet until LAN
PCs or devices try to go to Internet. Once Internet connection is established,
this device will drop the connection if maximum idle time is reached.
Manually: The device
won’t try to connect to Internet until users press
“connect” button at Status page.
Once Internet connection is established, this
device will drop the connection if maximum idle time is reached.
f.
NAT disable:
You can disable NAT feature if required.
Page 30 / 111
A-LINK WNAP4G
User Manual
30
g.
IGMP Proxy:
Enable this feature allows multicast stream (e.g. IPTV
stream) to pass-through this device.
E. PPP over Ethernet
a.
WAN Type:
Choose PPP over Ethernet.
b.
IPv6 Dual Stack:
If your ISP supports IPv6 dual stack, you can check this
check box to get an IPv4 address and an IPv6 address via one PPPoE
connection. After you check this check box, you also need to enable IPv6
function at
Advanced Setting->IPv6
setting page.
c.
PPPoE Account
and
Password
: The account and password your ISP
assigned to you.
d.
Primary DNS:
You can indicate IP address of primary DNS if required.
e.
Secondary DNS:
You can indicate IP address of secondary DNS if

Rate

4 / 5 based on 3 votes.

Popular A-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top