1. Home
    2. /
  2. Manuals
    3. /
  3. A-Link
    4. /
  4. RR24API
    5. /
  5. 3
Page 11 / 48 Scroll up to view Page 6 - 10
7.
Failure analysis chart (wireless)
(Use this when modem is in factory defaults)
?
Is the WL/ACT led ON
/
\
|
Yes
Is your computer connected to wireless network called “default”?
|
/
\
|
|
Yes
Can you open Internet pages normally?
|
|
/
\
|
|
|
Yes
Your wireless connection is OK *.
|
|
|
.2
|
|
No
Can you open modem web management (
)? (Password = password )
connection with correct VPI/VCI values has IP address *.
s
Renew IP address with Release/Renew buttons. Start this chart over *.
her VPI/VCI values than modem has already configured,
step 3 are advised.
s as in step 5 is advised *.
pe
and press Enter)
eb management (
|
|
/
\
Yes
Check from STATUS menu, that
|
|
|
|
|
|
/
\
|
|
|
|
Ye
|
|
|
|
|
No
If your connection needs ot
|
|
|
|
|
make settings with your ISP VPI/VCI values as in
|
|
|
If you have PPP connection, make setting
|
|
|
pen command prompt, ty
|
|
No
Does ping command replies?
(O
|
/
\
|
|
|
|
Yes
Check that your browser have no proxy settings configured.
|
|
|
/
\
Can you now access to modem w
)?
|
|
|
|
Yes
Check your ADSL line settings from your ISP.
Start this chart over *.
duct
|
|
for example with needle when power is on. If reset does not help, send it to A-Link warranty **.
Check your computer network settings as in step 1 have been told.
Does ping reply?
t this chart over.
You can try to reset the modem to factory defaults by pressing reset on back of the product
. If reset does not help, send it to A-Link warranty **.
it is activated and ready.
2. S
. Start this chart over **.
our modem wireless network as in step 2 is advised.
€/min + local network fee) or by E-mail : [email protected]
|
|
|
|
|
|
|
|
|
|
|
|
No
You can try to reset the modem to factory defaults by pressing reset on back of the pro
|
|
|
|
|
|
No
|
|
/
\
|
|
|
Yes
Star
|
|
|
|
|
No
|
|
for example with needle when power is on
|
|
|
No
1. Make sure that your computer have wireless network card and
|
|
can all wireless networks in range and connect to wireless network named default.
|
3
|
No
Activate y
/
\
Is the WL/ACT led ON?
|
|
|
Yes
Start this chart over.
|
No
Send modem to A-Link warranty **.
*/
Other support issues and questions you can contact A-Link technical support:
0600-41020 (2,67
**/
Warranty:
A-Link warranty
More information from
P.O.BOX 3
FIN-02941 Espoo, Finland
11
Page 12 / 48
8.
Setting up wireless network and security
irin
ter to RoadRunner 24AP(i+) with network cable.
dem web management.
age 13.
level:
elow.
________
ey below.
________________________________________
from page 13.
Advance
security level:
k and hide it. Write down name below.
_______________________
cryption password below.
•
Password = ________
•
Take a
•
You can see more details from page 14.
C
Important information about security!
12
Repa
g:
•
Connect your compu
•
Log in to ADSL – mo
•
You can see more detail from p
asic security
B
•
Add new network name for wireless network. Write down name b
•
Network name (ESSID) = _____________________________
•
Take 128-bit WEP – encryption in use. Write down encryption k
•
Key = ________
•
You can see more details
d
A
•
dd new network name for wireless networ
•
Network name (ESSID) = ______________
•
Take WPA/WPA2 –encryption in use. Write down en
______________________________
ccess control (MAC address filtering) in use.
onnecting your computer to secured wireless network:
•
Add your computer to secured wireless network.
•
You can see more details from pages 15 - 16.
More information about wireless network security
WLAN is as named wireless technology which transfers information using radio signal and it is
encryption and other security mechanisms. Anybody who are inside of
ork and
settings in use
etwork name (ESSID), WEP- or
PA/WPA2 – encryption and MAC – filtering you can get secured wireless network enough.
N, it do not have any
lt network name (ESSID) is default. Read below
reless
ss network feature.
Modem do not have WLAN active in default, but after activate WLA
encryption security enabled. Defau
instructions carefully, to get your wireless network secured. If you do not need wi
network at all, please turn off wirele
unsecured without any
wireless range and have wireless LAN card can access to unsecured wireless netw
possible also to all computers connected to unsecured wireless network.
For this reason it is very important to take modems wireless network security
and deny and block all unexpected visitors. With hidden n
W
More details in page 16.
Page 13 / 48
REPAIRING
1. Connect your computer to RoadRunner 24AP(i+) with net
twork cable (
work cable.
RJ-45).
. Log in to modem web management.
Open Internet browser and type address
It is recommended to modify wireless network settings with ne
13
2
(If you can not access to address
default password is
password
.
, check
computer network settings and browser proxy settings.)
. Modify wireless network settings.
rity
.
Change new name to wireless network (
ESSID
) and
write down it to page
12
.
Default Key ID =
1
e
>
age.
aracters long en
344556677889900aabbcc
. Write your encryption key to page
12
will work right when
WEP
encryption key is entered
k settings. You can find instructions from pages
15 -16
.
BASIC SECURITY LEVEL
3
Go to
WIRELESS
menu and choose
Channel/SSID/Secu
Note!
Network name can not contain any special
characters or spaces.
Choose
WEP
to Allowed Client Type.
Change below settings to
WEP
menu.
WEP Mode =
128-bit
Key Entry Method =
Hex
Key Provisioning =
Static
Key 1 = <
Type ecryption key her
Press
Save Settings
bottom-edge of p
Note!
You should enter your own
26
ch
numbers
0-9
and letters
a-f
, example
11223
for future use with your computer.
cryption key to
Key 1
field which can contain
You can remove network cable now. Wireless network
computer wireless networ
to
Page 14 / 48
ADVANCED SECURITY LEVEL
3. Modif
nd choose
(
ESSID
) and
hange
ESSID Broadcast
to
DISABLE
Choose
WPA/WPA2
to Allowed Client Type.
Authentication =
Pre-shared Key
Pre-shared key type =
Passphrase (8~63 characters)
e-shared Key = <
Type password here
>
Note!
Type
Pre-shared Key
about
8 - 63
characters long
e
12
for future use
ontrol
.
Choose
Yes
to
Enable MAC Filtering
. Choose
Allow
to
i
will
(Wireless LAN card MAC can be
/ALL
command)
ve
Note!
Check MAC addresses from
Wireless LAN adapter
etwork will work right when
WPA/WPA2
encryption
reless network settings. You can find instructions from pages
15 - 16
.
y wireless network settings.
Go to
WIRELESS
menu a
Channel/SSID/Security
.
Change new name to wireless network
write it down to page
12
.
C
Note!
Network name can not contain any special
characters or spaces.
Change below settings to
WPA/WPA2
menu.
Pr
Press
Save Settings
bottom-edge of page.
password. Write your password to pag
with your computer.
In
WIRELESS
menu choose
Access C
Access Rule for registered MAC addresses.
Enter w
LAN card MAC addresses from all computers which
ess point.
reless
access to this acc
found ex. in Win2000/XP with
IPCONFIG
When you have added all MAC addresses, press
Sa
Settings
bottom-edge of page.
on
Wireless Network Connection
.
You can remove network cable now. Wireless n
password is entered to computer wi
14
Page 15 / 48
Conne
ireless network
ndo
this exam
ed wireless network using Windows Vista operating system
indo
operating system or you have your wireless LAN card
managem
rt for further instructions, web site
http://www
cting your computer to secured w
ws Vista)
(Wi
In
ple are shown how to make connection to secur
ws Vista WLAN AutoConfig tool. If you use other
and W
own
ent software in use, you can contact A-Link technical suppo
.a-link.com
, phone 0600-41020 (2,67€/min +
local network fee) or E-mail [email protected].
etwork
from
Start
menu.
2. Open
Network and Sharing Center
.
1.
Open
N
3. Press
Connect to a network
link.
4. Choose network name you have specified from list
and press
Connect
button.
(If network is hidden, you can see
Unnamed Network
)
5. If network name is hidden, type it to
6. Type network password or encryption k
ey
line
Network Name
. Press
Next
.
to line
Security key or passphrase.
(This step does not appear if network is not hidden)
Press
Connect
.
15

Rate

3.5 / 5 based on 2 votes.

Popular A-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top