4. In the section labeled “

Customer Information

” enter your

•

First and Last name

•

Phone number

•

E-mail address

5. In the section labeled “

ADSL User Information

” enter your

•

ADSL username

•

ADSL password

If you do not know or do not remember your ADSL username or password, contact your ADSL

service provider to get these values.

Do not change the value in the “

Protocol”

field (

PPPoA

) unless you are specifically advised to do

so by your ADSL service provider.

6. Click

“

Save

”.

The basic installation settings of your RT-205 are now completed. Please wait until the LEDs on

the front panel of the RT-205 labeled “

ADSL

” and “

PPP

” light up in solid green.

You can check the status of your Internet connection by clicking the

“Status”

button on the left

menu bar of the AirTies ADSL Utility window

.

If you cannot connect to Internet even though the LEDs are all green, contact your ADSL service

provider.

9

AirTies RT-205 User Manual Rev.0.1

3.2.2

Installation Settings via the Web Interface

Once the cabling of your RT-205 is completed, you can adjust the initial settings with the advanced

web interface using any web browser (e.g.Internet explorerExplorer, Mozilla Firefox, Netscape).

You don’t need to be connected to the Internet to do this.

1. Open your web browser (e.g. Internet Explorer)

2. In the Address bar enter

192.168.2.1

, the default IP address of your modem, and press Enter.

This will launch the web interface of your AirTies RT-205 modem.

3.You will be prompted for a password to login. Initially, leave this field blank and continue by

clicking “

Submit

”.

4. Go to “

Connection Setup

” under the “

ADSL

” main menu on the left menu bar. You are now in

the “

PPPoA Connection Setup

” screen.

10

AirTies RT-205 User Manual Rev.0.1

4. Enter your ADSL Username and Password. If you do not know or do not remember your ADSL

username or password, contact your ADSL service provider to get these values.

Also, please check with your ADSL service provider to make sure the values for PVC

settings (VPI=8 and VCI=35) are compliant with your ADSL service provider’s infrastructure.

Basic installation settings of your RT-205 are now complete. Please wait until the LEDs on the

front panel of the RT-205 labeled

“PPP”

and

“ADSL”

light up in solid green. You should now be

connected to the Internet. If you are not

connected to the Internet even though the lights are

green, contact your ADSL service provider.

11

AirTies RT-205 User Manual Rev.0.1

125 Mbps Kablosuz

ADSL2+ 1 Portlu Modem

PWR

ADSL

PPP

WLAN

LAN

4.1

Wireless Security

It is not necessary to configure wireless security to enable wireless communication. However,

due to growing importance of data security, it is recommended that you choose

a suitable security

protocol and configure the RT-205 to use it.

Click on

“Security”

under the

“WIRELESS”

menu on the left menu bar of the RT-205 web interface.

You will be presented with wireless security choices.

4.

RT-205

Wireless Settings

You can configure the wireless communication and security features of your RT-205 by choosing

the “WIRELESS” menu on the left menu bar of the RT-205 web interface.

Go to “Wireless Settings” under the “WIRELESS” menu. Check the “Activate Wireless Network”

box.

You can assign a name to your wireless network by entering the name in the “Wireless Network

Name (SSID)” field.

If you check the “Hide Wireless Network Name (SSID)” box, the RT-205 will

hide your SSID during broadcast.

You can enter

a broadcast channel number (from 1 to 13) in the “Channel” field. The same channel

should be selected on all devices in the wireless network.

The

125Mbps G++ feature can be activated by checking “G++” box. Note that a wireless USB

adapter supporting 125Mbps is necessary on the receiver side to provide wireless communication

at 125Mbps.

12

AirTies RT-205 User Manual Rev.0.1

Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP) are wireless encryption protocols

used to encrypt the data traffic within the wireless network. AirTies RT-205 supports both encryption

standards. WPA is the latest and most advanced wireless encryption standard and provides you

with the highest level of data protection. All AirTies wireless products and the newly introduced

802.11g wireless communication devices support WPA. WEP is an earlier wireless security protocol.

If one of the devices in your wireless network does not support WPA, it is recommended that you

choose WEP encryption.

The AirTies RT-205 supports 802.1x Identity inspection as well. For detailed information about

how to setup 802.1x security, please consult www.airties.com

MAC Address Filtering allows you to control which network cards can connect to the AirTies RT-

205 and share your internet access. It is recommended to activate both MAC address filtering and

one of the wireless encryption protocols WAP or WEP.

4.1.1

WPA Security Settings

To enable WPA encryption, check the “WPA” box in the “Wireless Security” screen.

Enter a network key that is 8 to 63 characters long (use a combination of letters and digits)

in

“password” section by marking “PSK password” and click “Save”.You have to enter the same key

for all devices within the wireless network.

In order to use WPA2, which is a more advanced version of the WPA encryption, all wireless

receiver devices should also support WPA2.

13

AirTies RT-205 User Manual Rev.0.1