19216811.live21
Wi-Fi Protected Setup™ (
WPS
) is a new and easy way to configure the encryption for
your wireless network clients. In order to use it with your router, firstly, you must
configure the wireless encryption on the router. You can find instructions for configuring
it in the User Manual located on the CD that came with your router.
Secondly, you will
need to have wireless adapters that support this feature. If your wireless adapters do
not support WPS, you will need to set up the wireless security manually and you can
skip this section.
In the instructions below, we are going to use the utility, Wireless Monitor that comes
with the Airlink101® 300N or 150N Wireless Adapters, AWLC6070, AWLC6080,
AWLH6070, AWLH6080, AWLL6070, and AWLL6080 as the example.
First, go to the computer with the Airlink101 150N or 300N wireless adapter and open
the Wireless Monitor.
Under AP List, click on the wireless you try to connect to and
click on the
WPS Connect
button.
Note: If you do not see the WPS Connect button, you can go to
www.airlink101.com to download the latest utility and driver.
Choose your configuration method, either
Push Button
or
Pin Code
and click
Next
.