12

Step 8

Verify the Internet Connection Type the wizard detected. If it is not correct, please

configure it manually. Click

Next

.

Note:

If you are not sure which Internet Connection Type you use, please contact your Internet

Service Provider for this information.

Step 9

Enter the settings for your Internet Connection Type.

Dynamic IP (Cable Modem users)

Click on Clone to clone the MAC address of your PC to the modem then click

Next

.

PPPoE (DSL users)

Enter the user name and password provided by your ISP then click

Next

.

13

Step 10

Please wait while the Wizard trying to connect to the Internet. If you see the window

“Internet Connection Succeed”, your router has been successfully connected to the Internet.

Please click

Next

to configure the wireless settings.

14

Step 11

Configure a name for your wireless network. Click

Next

.

Step 12

Configure the security key for your wireless network. Check

Enable WPA Pre-Share

Key

. Enter 8 to 63 characters into WPA-Pre-Share Key. Click

Next

.

15

Step 13

Verify the settings you just configured for the Router. Click

Finish

to restart the Router.

Congratulations! Your router configuration has been finished.

16

2.2 Connecting to the Router Wirelessly

You must configure your wireless computer in order to establish a wireless connection to the

router. In this section, you can find the instructions of how to connect to the router wirelessly

with your

Vista

computer. You can also refer to the manual of your wireless network card

regarding how to connect to a router wirelessly.

Step 1

Click on this icon

on the task bar of your desktop, then click on

Wireless networks

are available.

Step 2

Select the wireless network you want to connect to and click

Connect

.