Page 31 / 182 Scroll up to view Page 26 - 30
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
24
OGU 930500275-A1
Setting Up Your Computer
FIGURE 5.
Network panel on MAC OS 10.x
5.
Click Apply Now.
6.
Click on the
Register
button to save the changes in the Control Panel.
7.
Enter
in the address bar of your browser to open the
PRG
AV4202N
Home Page.
USB CONNECTION
To connect your first Computer to the
PRG AV4202N
using USB port, you
have to install the Router’s USB driver on your computer.
Before connecting the USB Cable to the USB Port of the
PRG AV4202N
you have to run the setup
software and to follow the instructions. Connect the USB Cable only when required from the installation
software.
Only one Windows or Macintosh computer can be directly connected to the
PRG AV4202N
using the
USB connection. Additional computers can be added to your network using the others connection such
as Ethernet or Wi-Fi.
Page 32 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Setting Up Your Computer
OGU 930500275-A1
25
USB CONNECTION >> MS
WINDOWS
Using Windows 98SE the system could require the Operating System installation CD-ROM.
1.
Browse the Setup CD-ROM and install the USB Windows driver selecting
the folder x:\driver (where x is the CD-ROM driver unit).
2.
Make a double click on setup.exe file to start driver setup procedure.
3.
When the message “NOW CONNECT THE USB CABLE” appears, connect
the USB cable from a free USB port of the computer to the
PRG AV4202N
USB port.
4.
Enter
in the address bar of your browser to open the
PRG
AV4202N
Home Page.
USB CONNECTION >> MAC
OS 10.X
As MAC OS 10.x will automatically recognize the device, no USB driver installa-
tion is required.
1.
Enter
in the address bar of your browser to open the
PRG AV4202N
Home Page.
WI-FI CONNECTION
It requires a computer with 802.11b/g (Wi-Fi Certified) wireless adapter installed.
1.
Install your wireless adapter according to the manufacturer’s instructions and
verify that your computer is set to obtain an IP address automatically (DHCP
mode).
You will need to properly configure your adapter to communicate with the
PRG AV4202N
according
to the configuration rules.
2.
In the configuration window of your wireless adapter scan the wireless net-
work (marked with the relevant SSID name) present in your physical envi-
ronment.
3.
Select the SSID of the
PRG AV4202N
4.
Complete the configuration of the wireless adapter with the same parame-
ters of the
PRG AV4202N
which are:
RF channel; automatically detect (default = 6)
WEP encryption enable or disable (default = Disable)
WEP key size
Page 33 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
26
OGU 930500275-A1
Setting Up Your Computer
WEP key used
5.
To check the connection, connect to the
PRG AV4202N
Home Page, enter-
ing http://192.168.1.1/ in the address bar of your browser.
Page 34 / 182
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Router Configuration
OGU 930500275-A1
27
Router Configuration
Router
Configuration
INTRODUCTION
The Router setup program is web based, which means that it is accessed
through your web browser.
To access to Router’s web server:
1.
Launch your web browser on the computer
2.
Enter the following URL in the location or address field of your browser:
The Router comes with a default IP address (192.168.1.1). If you change it, please take note of the
new Router’s IP address, otherwise a “Reset to Factory Default” operation should be done to be able
to access again to the Router.
Access to DSL router configuration pages is controlled through user accounts.
The default one is the
admin
user with unrestricted access to change and view
configuration of the DSL Router.
The default username and password are both set to “admin”. It is recommended to change these de-
fault values. Make sure you remember your user name and password, since this is the only way you
will be able to manage your Router
You will be asked to choose the Router interface language between
English,
French, Russian, Spanish, Korean, Traditional Chinese, Japanese, German,
Italian
and
Simplified Chinese
and to insert a
User Name
and a
Password
: in-
sert them to access to Router’s configuration panels.
Page 35 / 182
PRG AV4202N
© (2007) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
28
OGU 930500275-A1
Router Configuration
If not already configured, at the first login the
Installation Wizard
panel will be
shown to configure the Router connection parameters, otherwise the
Home
page
will be opened as shown in Figure 1.
The
Home page
contains a menu on the left - always available in all the web
pages which is the starting point for any Router’s configuration.
The complete menu has the following main items:
1.
Home
: it shows a graphical representation of your network.
2.
Map View
: it displays the Network Map of attached or configured devices
3.
Quick Setup
: it allows to quickly perform the Router’s connection setup
4.
Network Connections
: it shows the status of network connections allowing
to modify them or to create new ones
5.
Security
: it allows to set security settings
6.
Voice over IP
: it allows to set VoIP accounts
7.
Parental Control
: it allows to set Parental Control filtering
8.
QoS
: it gathers all QoS parameters and settings
9.
Advanced
: it allows the access to the advanced configuration panels and to
define
Router
parameters
devoted
to
user
access,
log
management,
Router’s time, Backup Router’s configuration, etc.
10.
System Monitoring
: a menu to show and run diagnostic test for trouble-
shooting or system behavior analysis and to access to Device Information
and Statistics
11.
Logout
: to logout from Router’s session.
In order to submit the changes of most of device parameters you have to click the
Apply
button to save
permanently your changes. In some case a Router’s reboot is required.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top