150Mbps Wireless Broadband Router

User Manual

19

5.

Choose Obtain an IP address automatically and Obtain DNS server address automatically,

150Mbps Wireless Broadband Router

User Manual

20

and then press the OK to close the window.

6.

Press OK to close the Local Area Connection Properties window.

3.1.4.

MAC OS

Please follow the steps blow to setup your computer:

1.

Go to Start

→

System preference Settings

→

Network.

150Mbps Wireless Broadband Router

User Manual

21

2.

Click Network, Select Use DHCP at the Configuration bar, the system will get the IP

address automatically.

Press Apply to complete this operation and close the window.

150Mbps Wireless Broadband Router

User Manual

22

3.2.

Checking Connection with the Router

After configuring the TCP/IP protocol, use the ping command to verify if the computer can

communicate with the Router. To execute the ping command, open the DOS window and Ping

the IP address of the 150Mbps Wireless Broadband Router at the DOS prompt:



For Windows 2000/XP: Start -> Run. Type cmd and click OK.



For Windows Vista/7:Start

→

Type cmd at the start search bar and press the Enter.



For MAC OS

→

The system will complete this operation automatically.

At the DOS prompt, type the following command:

If the Command window returns something similar to the following:

C:\Documents and Settings\admin>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Reply from 192.168.1.1: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

Minimum = 1ms, Maximum = 1ms, Average = 1ms

Then the connection between the router and your computer has been successfully established.

If the computer fails to connect to the router, the Command window will return the following:

C:\Documents and Settings\admin>ping 192.168.1.1

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.

Request timed out.

Request timed out.

150Mbps Wireless Broadband Router

User Manual

23

Request timed out.

Ping statistics for 192.168.1.1:

Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

Verify your computer's network settings are correct and check the cable connection between the

router and the computer.

In order to make the whole network operate successfully, it is necessary to configure the

150Mbps Wireless Broadband Router through your computer has a WEB browser installed.

Please follow up the steps listed below.

3.3.

Login



Open a web browser (Safari, Internet Explorer, etc.) on the computer you have just

connected to the router, type

in the address bar, and press enter



In the pop-up window, enter the user name

admin

and password

admin

and then click

OK.